Most aluminium window prices you'll find online are fitted prices. The windows, the labour, the removal of the old frames and the certificate are rolled into one figure, often per window or per house. That makes it hard to tell what the windows themselves cost, or whether two quotes are for the same thing.
This guide is for homeowners pricing replacement windows or windows for an extension, and for installers and builders pricing a job. We manufacture aluminium windows from Cortizo systems at our factory in Leeds and sell them supply-only, to trade and retail customers. We don't install, so every price here is for the windows alone. Your installer quotes the fitting.
The short version
- As a supply-only guide from Mazuli, a standard single-sash Cortizo casement window in a stock colour starts from around £350 unglazed.
- Multi-sash frames with high-performance double glazing typically cost £600–£1,800, depending on the configuration.
- Size, the number of opening sashes, the system, glazed or unglazed supply, the glass, the colour and add-ons such as trickle vents all move the price.
- Replacement windows must be signed off, either by an installer registered with a competent person scheme or by building control. That cost sits with the fitting, not the windows.
- Installation is a separate cost. Check what both the window quote and the fitting quote include before you compare them.
How much do aluminium windows cost in the UK?
These are our guide prices for Cortizo aluminium casement windows, supplied without installation:
| Window | Supply-only guide price |
|---|---|
| Single-sash casement, stock colour, unglazed | From around £350 |
| Multi-sash frame, high-performance double glazing | Typically £600–£1,800, depending on the configuration |
| Larger frames, tilt and turn, triple glazing or non-standard layouts | Quoted individually |
The multi-sash range is wide because every window is made to measure, and "a window" can mean very different things. A frame can be up to 2,400mm tall and, depending on how many sashes it holds, up to 2,500mm, 4,500mm or 5,000mm wide. A small bathroom window with one top hung opener and a wide living-room window with a fixed centre pane and two side hung openers are both "multi-sash" in the loose sense, but they use very different amounts of aluminium, glass and hardware.
We don't publish a price list per size, because the combinations run into thousands. Send us the width, height, sash layout, glass and colour for each window and we'll quote the exact set.
What does a supply-only window price include?
"Supply-only" means you're buying the finished windows, not the work to fit them. From us, that covers:
- The window, made to your sizes. Cut, machined and assembled in our Leeds factory from Cortizo profile, and quality-checked before dispatch. The frames arrive fully assembled.
- Hardware and locking. Every opening sash has multi-point espagnolette locking. Side and top hung sashes have friction stays as standard, side hung sashes have hinge-side security keeps, and the glass is internally beaded so it can't be removed from outside.
- Sealed glass units, if you order glazed. The units are made to the size of each sash and fixed light by our glass supplier and delivered with the frames. Your installer fits the glass on site. An unglazed order is the assembled frames only, and your installer sources the glass.
- Delivery. Mainland UK delivery is included, on our own fleet. You get a delivery date when you order.
Cills, head add-ons, trickle vents, Georgian bars and handle finishes are chosen per window, so check they're on the quote if you need them.
It doesn't cover taking out the old windows, any change to the opening, fitting the frames and glass, sealing, making good inside and out, or the Building Regulations sign-off. Those are your installer's work, and their price.
What makes aluminium windows cost more or less?
Overall size
A bigger frame uses more aluminium and a bigger area of glass, and big panes need thicker glass. Our glass thickness goes up with the frame area of the unit: 4mm at 2.5m² or less, 6mm from 2.6 to 4.5m², 8mm from 4.6 to 5.5m² and 10mm at 5.6m² or more.
Opening sashes versus fixed lights
Each opening sash adds a second frame inside the outer frame, plus hinges or stays, a handle and an espagnolette lock. A fixed light is glass held directly in the outer frame. So a window with one opener and a large fixed pane usually costs less than the same size window with every pane opening, and it gives more glass for the view.
Every opener has to stay within its sash limits, which also shapes the layout:
| Sash type | Max. size (W × H) | Max. weight |
|---|---|---|
| Casement, slim sash, side hung | 950 × 1,300mm | 35kg |
| Casement, slim sash, top hung | 1,200 × 1,300mm | 50kg |
| Casement, heavy duty, side hung | 750 × 1,750mm | 42kg |
| Casement, heavy duty, top hung | 1,800 × 1,800mm | 100kg |
| COR 70 Hidden Sash (including tilt and turn) | 1,300 × 2,400mm | About 100kg |
If an opener needs to be bigger than a slim sash allows, it moves to a heavy-duty sash or to COR 70 Hidden Sash, and the hardware changes with it. Heavy-duty sashes are available on the casement system only.
The system and the look
We make windows on two Cortizo systems. The Cortizo casement covers side hung, top hung and fixed lights, with a flush casement version where the sashes close level with the frame. The Cortizo COR 70 Hidden Sash conceals the opening sash behind the frame, so every pane in an elevation looks the same from outside, and it's how we make tilt and turn windows. Each is priced on its own profiles and hardware, so if you're undecided, ask us to price the same window both ways.
Glazed or unglazed
Unglazed windows cost less from us because the glass units aren't included, and they have our fastest lead time. They suit installers who source their own glass or need a particular type, such as toughened, laminated, self-cleaning or acoustic. The glass still has to be bought and fitted, so compare the total, not just the frame price. For a homeowner using a general builder, a glazed order is usually simpler, because the glass units are made to size and arrive with the frames.
The glass specification
Our casement windows take units from 28mm to 44mm: 28mm double-glazed or 44mm triple-glazed. COR 70 Hidden Sash takes units up to 40mm. Double glazing is the standard choice. Triple glazing costs more and weighs more, which counts against the sash weight limits above. Obscure, acoustic, solar-control and laminated glass also change the price.
Some of the glass cost isn't optional. Approved Document K (2013 edition) treats glass in a window between floor level and 800mm above it as a critical location (Diagram 5.1). Paragraph 5.2 says glass there should break safely, be robust, be in small panes or be permanently protected. A floor-length window or a low cill usually means toughened or laminated glass in the lower part.
Colour
Our seven stock colours have the shortest lead times: White, Agate Grey, Anthracite Grey, Black, and three dual-colour finishes (Agate Grey on White, Grey on White and Black on White). Dual-colour, with a different shade inside and out, comes at no extra charge on stock finishes. Any other RAL colour can be ordered and takes around 2 weeks, and woodgrain finishes take 4–6 weeks. Colour is one of the things that sets the price, so ask for stock and RAL to be quoted side by side if you're undecided.
Add-ons
Cills come in 90mm stub, 150mm, 180mm and 230mm, with 20mm and 38mm add-ons. Trickle vents, Georgian bars and handles in six finishes are also available. Each one changes the price a little, so list what you want for every window at the start rather than adding it later.
Do replacement windows need trickle vents, and does that add cost?
Sometimes the Building Regulations decide part of the specification for you. New windows are far more airtight than old ones, so Approved Document F, Volume 1 (2021 edition) makes sure replacing them doesn't leave a home under-ventilated:
- If the old windows had trickle vents (background ventilators), paragraph 3.14 says the new ones should too, no smaller than the originals and controllable by the occupant or automatically.
- If the old windows had none, paragraph 3.15 says ventilation must be no worse than before. One way to show it is vents of at least 8,000mm² equivalent area in habitable rooms and kitchens and 4,000mm² in bathrooms. With continuous mechanical extract ventilation, 4,000mm² in each habitable room that isn't a wet room is enough. Building control can accept other provisions.
Trickle vents are an add-on on our windows, so they belong on the quote. Tell us the rooms and vent sizes your installer needs when you ask for a price, rather than finding out on fitting day that they were missed.
Do aluminium windows need triple glazing to meet Part L?
Not usually. In England, Approved Document L, Volume 1 (2021 edition incorporating 2023 amendments) sets a maximum U-value of 1.4 W/m²K, or a Window Energy Rating of Band B, in Table 4.2 for new or replacement windows in an existing home, including windows in an extension. Paragraph 10.3 adds that replacement windows should be draught-proofed, with insulated cavity closers where appropriate. The 2026 edition, which takes effect on 24 March 2027, keeps the same limit in its Table 3.2.
Our Cortizo casement windows are from 1.4 W/m²K with our standard Ug 1.0 double glazing, which meets that limit. With 44mm triple glazing (Ug 0.5) they reach about 1.0 W/m²K. Triple glazing is a choice, for comfort or a lower heating bill, rather than something Part L forces on a replacement window. Whole-window U-values change with size and glass, so ask us for the figure for your actual windows before you price them, and compare the whole-window figure (Uw), not the centre-of-glass figure (Ug).
For a listed or period building where the character has to be kept, paragraph 4.10 allows windows that can't meet Table 4.2 if the glass doesn't exceed a centre-pane U-value of 1.2 W/m²K, or if single glazing is backed by low-emissivity secondary glazing. Agree this with building control before you order.
How are replacement windows certified, and who pays for it?
A replacement window is a controlled fitting under the Building Regulations, so the work has to comply and be signed off. That's part of the cost of fitting, and it should be on the installation quote. There are two routes in England:
- A registered installer. Approved Document L notes that if the work is only replacement windows and the installer is registered with a relevant competent person scheme, building control doesn't need to be notified. GOV.UK lists the schemes authorised for replacement windows in existing dwellings as Blue Flame Certification, CERTASS, Certsure, FENSA, NAPIT and ASSURE.
- Building control. If the installer isn't registered, or you're fitting the windows yourself, apply to your local authority or a registered building control approver. They inspect the work and issue a certificate.
We manufacture and supply windows; we don't install them, so certification sits with your installer or with building control. If you're comparing a fitted quote with a supply-only one plus a separate fitter, check which route the fitter will use and whether the cost of certification is in their price. Keep the certificate with your property documents.
What should an aluminium window quote include?
Two quotes for "eight aluminium windows" can describe quite different products. Before you compare prices, make sure each quote states, for every window:
- The system and who makes it. Which aluminium system it is, and who fabricates the windows.
- The exact frame size, and which sashes open, which way, and which are fixed.
- The sash style: standard casement, flush casement, hidden sash or tilt and turn.
- The whole-window U-value (Uw) for that size and glass, not the centre-pane figure (Ug).
- The glass: unit thickness, double or triple, safety glass where needed, obscure or acoustic glass, or whether it's unglazed.
- The colour inside and out.
- Cills, add-ons, trickle vents (with sizes), Georgian bars and handle finish.
- The locking specification and any security testing. The Cortizo casement and COR 70 Hidden Sash systems have passed PAS 24 (Annex C) testing, and we can send the reports on request.
- Delivery and whether it's included.
- VAT, and whether the price includes it.
- Lead time, and when you'll get a delivery date.
- The guarantee: what it covers, for how long and on what conditions.
If an installer's fitted quote doesn't split the windows from the labour, ask them to. Then you can check the window specification against a supply-only quote. We price-match comparable like-for-like quotations, so send yours to sales@mazuli.co.uk.
How much does it cost to install aluminium windows?
We can't give you an installation price. We supply and deliver; we don't survey, measure on site or install. Retail customers use their own builder or installer, and trade customers fit the windows themselves. Fitting costs depend on access, the existing frames and the walls they sit in, so get them quoted for your house.
When you ask for an installation quote, check what it covers:
- Removing the old windows, and disposing of them.
- Measuring. Your installer should measure each opening and work out the frame sizes before the order is placed, because we make every window to the sizes you confirm.
- Glazing on site. The glass is always fitted on site, whether the units come from us with a glazed order or your installer sources them for an unglazed one.
- Fitting, sealing and making good inside and out, including cavity closers where they're needed.
- Access, such as scaffolding or a tower for upper-floor windows.
- Certification, through a competent person scheme or building control.
If you're buying the windows yourself, agree with your installer before ordering who measures, who receives the delivery and who fits the glass.
Is it cheaper to buy aluminium windows at trade?
There are three common ways to buy aluminium windows:
- Fitted, from an installer. The installer buys the windows from a fabricator and quotes one price for supply and fit. It's the simplest route, and the installer takes responsibility for measuring, the finished job and the certificate.
- Supply-only, as a homeowner. You buy the windows direct from a manufacturer like us and have your own installer fit them. You see the window price on its own and choose the specification yourself, but you need someone to measure accurately, be ready for delivery and certify the work.
- At trade, as an installer or builder. You buy on an account at trade prices and fit the windows yourself.
Buying from us is manufacturer-direct, so there's no distributor in the chain adding a margin. Our trade accounts have no minimum order value and no lengthy application process. We set accounts up the same day and send a bespoke trade price list within hours. Pricing is volume-based, so it improves as you order more, and every account has a dedicated trade account manager. Our guide to buying aluminium windows and doors at trade covers what to look for in a supplier.
Is the cheapest window quote the best value?
Not always. Three things that don't show on the price can cost you later.
Lead time
Most UK aluminium fabricators quote 3–6 weeks. Windows are often replaced with the old frames out and the openings boarded, or with an installer booked for a set week, so a late delivery has a cost. We make our windows in-house in Leeds:
| Order | Lead time |
|---|---|
| Unglazed, stock colour | 2–5 working days |
| Glazed, stock colour | 6–10 working days |
| RAL colours | Around 2 weeks |
| Woodgrain finishes | 4–6 weeks |
We deliver on our own fleet, with our own drivers, and you get a delivery date when you order, so your installer can book the fitting around it. Our lead times guide explains how to plan a job around them.
Ordering everything together
Windows are usually a whole-house order rather than a single opening. Ordering every window together is the simplest way to keep the colour and finish consistent across the property, and it avoids paying for a second delivery or a second visit from your installer for one forgotten window.
The guarantee and the finish
Our powder coating is Cortizo's QUALICOAT-certified finish, and it is guaranteed for 10 years against discolouration, flaking and UV fading, so the frames never need repainting. When you compare quotes, look at what each guarantee covers and the conditions attached, not just the headline number of years.
If you're still choosing a window style, our aluminium windows buyer's guide covers casement against hidden-sash windows, opening types, escape windows and planning permission in more detail.
Mazuli aluminium windows
Mazuli is a Cortizo-accredited manufacturer in Leeds. We make Cortizo casement and COR 70 Hidden Sash windows at our 25,000 sq ft factory and supply them to trade and retail customers across the UK mainland, delivered on our own fleet. Retail customers use their own builder or installer to fit. Factory visits are welcome by appointment, Monday to Friday.
See sizes, colours and sash options on our aluminium casement windows page, or request a quote with the sizes, sash layout, glass and colour for each window. Installers and builders can open a trade account the same day. You can also call 0113 827 5596 or email sales@mazuli.co.uk.


